|
|
McLube dry film lubricants, oil dispersions, greases and pastes
meet a vast range of industrial requirements. McLube dry film lubricants
contain MoS2 (molybdenum disulfide) and PTFE (polytetrafluoroethylene).
They adhere unusually well to all types of surfaces including machine
parts and fittings, gears, cams and springs; leather, plastic and
elastomeric gaskets and packing; natural and synthetic cords, twines
and cables. By minimizing friction, these coatings reduce power
input and prevent part seizure. McLube dry lubricants work themselves
into surfaces to promote longer wear life, repel dust and contaminants
and provide superior protection against scoring, surface corrosion
and extreme pressure.
McLube oil dispersions are formulations of MoS2 in various oils
for use on plain bearings, sliding surfaces, threaded connections,
press fittings and open gears. They are particularly suited for
use in hard to reach areas. McLube greases and pastes containing
MoS2 are ideal for high and low temperature applications. The addition
of MoS2 yields grease and paste lubricants that carry high loads,
reduce wear, lower maintenance costs, are environmentally safe and
can replace more hazardous and wasteful lubricants. Let Team McLube
enhance your bottom line by greatly increasing the energy and cost
efficiency of anything that moves.
Dry
Lubricants
- Molybdenum
Disulfide (MoS2)
- MoS2
with adhesion promoters
- Polytetrafluoroethylene
(PTFE)
- PTFE with
adhesion promoters
- Mixed PTFE
and MoS2
with adhesion promoters
Dry
Lubricant Properties - MoS2
- Minimize
friction
- Furnish
high load performance
- Reduce power
input
- Prevent
metal to metal contact
- Provide
superior protection against wear, seizure, galling and scoring
- Repel dust
- Protect
against moisture and corrosion
- Are not
affected by temperature variations over a broad range
- Adhere well
to all types of surfaces
- Work themselves
into surfaces for longer life
- Liquid oxygen
compatibility
Dry
Lubricant Properties - PTFE
- Low coefficient
of friction
- Thermal
stability
- Chemical
stability
- Minimum
stick-slip
- Insolubility/inertness
- Antistick
nature
- Cleanliness
- Liquid oxygen
compatibility
MoS2
and PTFE solid lubricants impart excellent lubricating properties
to surfaces and enhanced lubrication properties result when
MoS2 and PTFE are used together as mixtures.
Dry
Lubricant Product Analysis
- Dry MoS2
powders of varying particle sizes
- MoS2
dry film, bonded lubricant
- Dry film,
bonded blend of PTFE and MoS2
- MoS2
water based, dry film , bonded lubricant
- MoS2
water based, heavy duty, dry film , bonded lubricant with excellent
adherence
- Hard, dry,
bonded PTFE lubricant coating
- Hard, dry,
PTFE lubricant coating with excellent stick-slip characteristics
and low coefficient of friction
- Hard, dry,
flexible coating for sliding metal surfaces which may be exposed
to moisture, reactive chemicals or active solvents
Dry
Lubricant Uses - MoS2
- All types
of sliding surfaces
- Metal forming
- Threaded
connections, conveyors, guide posts, gears, splines, cams, springs
- Prevention
of seizing, galling
- Protection
against extreme pressures
- Protection
from surface corrosion
Dry
Lubricant Uses - PTFE
- Leather,
plastics, elastomers for gaskets, packing, etc.
- Cord, twines,
rope, cable made of natural or synthetic fibers
- Machine
parts and fittings - nuts, bolts, linkages, connectors
- Instruments,
Office machines
- Metalworking
operations
- Musical
instruments
- Household
uses - hinges, locks, cabinet drawers and guides, zippers, etc.
Dry
Lubricant Products
McLube MoS2 - 108L
Bonded dry film molybdenum disulfide (MoS2) provides
excellent lubricity and durability.
McLube 1700L
Bonded, dry film of polytetrafluoroethylene (PTFE) coating,
colorless lubricant.
McLube 1708L
Dry film, bonded coating of PTFE/MoS2 combination
exhibiting superior performance to either ingredient used alone.
McLube MoS2 - 900
Water based MoS2 lubricant, provides a bonded, dry
film coating.
MAC-480
Solvent dispersion of PTFE furnishing a dry film with low coefficient
of friction.
MAC-422
Water based dispersion of PTFE particles, provides a dry, colorless,
bonded film coating.
McLube MoS2 - 98
Super fine grade MoS2 powder, average particle size
0.4 microns.
McLube MoS2 - 99
Technical grade MoS2 powder, average particle size
7 - 10 microns.
McLube MoS2 - 100
Technical fine grade MoS2 powder, average particle
size 0.8 microns.
Oil
Dispersions
- MoS2
in various oils Oil Dispersion Properties MoS2
- Provide
thin film lubricant
- Oil serves
as vehicle to carry MoS2 to wearing surface
- Work by
volatilization of oil at high temperatures to leave an effective
MoS2 lubricating film
- Leave no
deleterious deposits at high temperatures
- Convenient
for application to hard-to-reach areas which are difficult to
lubricate with grease
Oil
Dispersion Product Analysis
- Synthetic
oil dispersions of MoS2 which leave no carbon or resinous
deposits
- Penetrating
dispersions of MoS2, effective in freeing connectors
frozen by corrosion or chemical attack.
Oil
Dispersion Products
McLube
MoS2 - 500
Synthetic oil dispersion of MoS2 which leaves no
carbon or resinous deposits, excellent high temperature lubricant
for conveyor oven chains, sliding surfaces and bearings.
McLube
MoS2 - 722
Penetrating oil dispersion of MoS2 effective for
freeing connectors frozen by rust and corrosion or chemical
attack.
Greases and
Pastes
- Greases
and pastes containing MoS2
Greases
and Pastes Properties MoS2
- Carry high
loads
- Reduce wear
- Protect
parts
- Lower maintenance
costs
- Operate
at high and low temperatures
Greases
and Pastes Product Analysis
- MoS2
fortified grease and antiseize lubricant
- MoS2
fortified grease in aerosol form
- Extreme
pressure, antiseize paste lubricant containing high concentration
of MoS2
- Multipurpose,
wide temperature range grease and antiseize compound
Greases
and Pastes Uses MoS2
- All types
of plain bearings
- Use as antiseize
for threaded connections, press fittings, studs, sliding surfaces,
open gears
- Heavy duty
and extreme pressure applications
- Surfaces
where frequent lubrication is impossible or inconvenient
- High temperature
applications such as conveyor chains in heat treat ovens
Availability
MoS2
dry powders, pastes and greases are available in containers of various
sizes ranging from one pint to five gallons. Other McLube products
are offered in one and five gallon containers with some available
in aerosol form.
Important Information
In addition
to the products listed, we have a number of other products, both
solvent based and water based, which can be recommended to meet
specific requirements. There should be a McLube product to meet
your every release and antistick need. Call us for expert technical
assistance in selecting the optimum candidate for your application.
If you have
a problem with your specific process, let us know about it; our
technical staff will be glad to work with you to develop a suitable
product to meet your release problem.
To be convinced
of the benefits of McLube, we suggest you evaluate the appropriate
product under your particular production conditions. Evaluation
samples and technical assistance as well as custom formulations
that suggest themselves to meet critical application problems are
available on request.
Go to the E-Mail
page for sample and contact information.
|
